Many people experience that the bathroom feels colder than the rest of the house even though the thermometer shows the same temperature as the other rooms.
This applies not only to bathrooms but also to toilet areas and laundry rooms, where comfort is often perceived as being worse than in the rest of the home.
The spontaneous conclusion is often that the heat is too low.
In reality, there is often something completely different behind the feeling.
Having worked with infrared heating since 2014, we at Infracenter have seen the same pattern with thousands of customers. The problem is rarely that the temperature is too low. Instead, it is often about high humidity, cold surfaces and a room climate that feels raw and less comfortable.
That's why Infracenter sees the same problems in bathrooms over and over again.
Since 2014, Infracenter has helped thousands of customers create better comfort using infrared heating.
Over the years, we have installed infrared heating panels in everything from small WC spaces to exclusive bathrooms, hotels, spas and private homes.
Even though the environments look different, the same problems recur time and time again.
The bathroom is at the right temperature according to the thermometer, but is still perceived as cold, damp, or less comfortable than the rest of the home.
Experience from thousands of installations shows that the problem is rarely that the temperature is too low. It is more often about humidity, cold surfaces and how the climate in the room is actually perceived.
Same temperature – completely different feeling
Two rooms can have exactly the same temperature and still feel completely different to stay in.
A living room with wooden floors, textiles and drier air often feels warm and comfortable. A bathroom with tiles and higher humidity, on the other hand, can feel cold even though the thermometer shows the same number of degrees.
Common bathroom problems and how they are experienced
| Problem | How it is experienced |
|---|---|
| Tiled floor | Cold underfoot |
| High humidity | Raw feeling |
| Damp towels | Feeling trapped |
| Cold walls and tiles | Lower comfort |
| Bad dehydration | The bathroom feels less fresh |
| Dryer surfaces | Higher perceived comfort |
That's why many homeowners find that the bathroom never feels as comfortable as the rest of the house, even though the heating is working properly.
The bathroom is one of the most important comfort spaces in the house.
For many, the bathroom is the first room they visit in the morning and the last before going to bed.
This is where we shower, get ready for the day and relax in the evening.
Small improvements in comfort are therefore much more noticeable than many people think.
A bathroom that feels dry, comfortable and fresh every day can make a bigger difference in everyday life than many people first realize.
High humidity is often the real cause
Bathrooms, toilets and laundry rooms contain significantly more moisture than most other rooms in the house.
Every shower, washing machine and wet towel contributes to raising the humidity. When humidity levels rise, many people experience that the air feels heavier and that the room takes on a raw feel.
This is also why many people describe the bathroom as cold even though the temperature is actually completely normal.
In many cases, more degrees are not needed.
It is a drier and more pleasant climate.
This is why many people like to open the window after taking a shower.
A common comment we hear from customers is that they like to open the bathroom window after the shower to "let in fresh air".
Many people describe it as the air feeling trapped or heavy.
In most cases, it is not a lack of oxygen. Instead, it is the high humidity that makes the room feel less comfortable.
When humidity decreases, many people find that the bathroom feels both fresher and more comfortable without the temperature actually changing.
Cold surfaces enhance the raw feeling
Bathrooms often contain materials such as ceramic, tile, glass and stone.
These materials naturally feel cooler than, for example, wood, carpets and textiles. When they are also exposed to high humidity, the feeling of cold is further amplified.
This is why many people experience that the floor feels cold underfoot even though the room is at a reasonable temperature.
For many, it is precisely the combination of moisture and cold surfaces that creates the unpleasant feeling.
This is why infrared heating panels are particularly suitable for bathrooms.
Unlike many traditional heating systems, infrared heating panels don't just heat the air. They also heat floors, walls, towels and other surfaces in the room.
When surfaces become warmer, many people find that the bathroom feels drier, cozier and more comfortable to stay in.
That's one of the reasons why bathrooms are one of the most common uses for infrared heating panels.
How much power is needed in bathrooms and toilets?
As a rule of thumb, you can usually expect around 100 W per m² in modern and normally insulated homes.
| Room size | Recommended power |
|---|---|
| 3 m² | about 300 W |
| 4 m² | approx. 400 W |
| 5 m² | approx. 500 W |
| 6 m² | approx. 600 W |
| 8 m² | approx. 800 W |
| 10 m² | approx. 1,000 W |
Please note that the power requirement may vary depending on ceiling height, insulation, ventilation and room design.
That's why many people choose infrared heating panels for bathrooms
| Challenge | Advantage of infrared heating panels |
|---|---|
| Cold tile floor | Higher perceived comfort |
| High humidity | Drier climate |
| Damp towels | Faster dehydration |
| Cold walls and tiles | More comfortable bathroom |
| Raw feeling after shower | Fresher environment |
| Limited wall space | Discreet ceiling mounting |
Dry towels every morning
An appreciated bonus that many customers discover after installation is that towels, bathrobes and laundry often dry faster.
When the climate in the bathroom becomes drier, moisture can more easily leave textiles and other materials.
This not only means shorter drying times, but many also find that the bathroom feels fresher and that the risk of trapped odors is reduced.
It's a small detail that is noticed every day.
Discreet heating that suits modern bathrooms
Modern bathrooms are often characterized by clean lines, large tiled surfaces and well-thought-out design.
Infrared heating panels can be discreetly mounted on the ceiling and take up minimal space, allowing comfort to be improved without affecting the appearance of the room.
For many, it is an important advantage when investing in a bathroom where both function and design play a major role.
Small improvements that are noticeable every day
Unlike many other rooms in the house, the bathroom is used every day, often several times a day.
Therefore, even small improvements in comfort are very clearly noticeable over time.
A bathroom that feels drier, fresher and more comfortable after a shower can make a bigger difference in everyday life than many people first think.
It is also one of the reasons why bathrooms are one of the most common rooms where customers choose to install infrared heating panels.
Why customers choose Infracenter
Infracenter is today the Nordic region's leading specialist in infrared heating and sells several thousand infrared heating panels every year.
Over the years, we have helped customers in everything from villas and holiday homes to hotels, spa facilities and exclusive residences.
The experience from these installations means that we know which solutions work in reality.
✔ Specialist in infrared heating since 2014
✔ The Nordic region's leading specialist in infrared heating panels
✔ Own products developed by Infracenter
✔ Several thousand installations every year
✔ Up to 10 years factory warranty
✔ Solutions for bathrooms, toilets, laundry rooms and homes
Frequently asked questions
Why does the bathroom feel cold even though the temperature is right?
It is often due to high humidity, cold surfaces and materials such as clinker and tiles rather than the temperature actually being too low.
Does infrared heating help with the raw feeling in bathrooms?
Many customers find that the bathroom feels drier and more comfortable when floors, walls and other surfaces are heated.
Are bathrooms a common area of use for infrared heating panels?
Yes. Bathrooms and toilets are two of the most common rooms where our customers install their first infrared heating panels.
Can towels and laundry dry faster with infrared heat?
Many customers find that both towels and laundry dry faster when the climate in the room becomes drier.
Are infrared heating panels safe in bathrooms?
Yes, provided the right product is selected and installed according to current regulations for wet rooms. Infracenter offers models that are adapted for bathroom environments.
Summary
If the bathroom feels cold even though the thermometer shows the correct temperature, it is often the humidity and cold surfaces that are behind the feeling.
High humidity can create a damp and less comfortable climate that makes the room feel colder than it actually is.
By creating drier surfaces and a more comfortable indoor climate, infrared heating panels from Infracenter can contribute to a bathroom that feels more comfortable, fresher and more inviting – every day of the year.