A stable should be a safe, pleasant and functional environment for both horses and people. At the same time, a stable is one of the most demanding environments to create a good indoor climate in. Humidity, temperature changes, wet blankets, wet horses and daily activity make it difficult for many traditional heating systems to deliver the results that stable owners actually want to achieve.
For most people, the challenge is not about making the stable warm.
It's about keeping it dry.
Since 2014, Infracenter has helped horse owners, riding facilities and professional businesses across the Nordic region create drier, more comfortable and more functional stable environments with the help of infrared heating. Through thousands of installations, we have seen the same results time and time again – less moisture, better comfort and an environment that works better for both horses, people and equipment.
Humidity is often a bigger problem than cold
When considering heating a stable, it is natural to first think about temperature. However, in practice, it is often the moisture that causes the biggest problems.
Wet blankets, wet horses, water buckets, washing areas and large temperature differences mean that many stables are perceived as damp and damp for much of the year.
The consequences are quickly noticeable:
Bad smell
Moisture damage
Mold growth
Wear and tear on equipment
Damp saddles and blankets
A less pleasant work environment
This is where infrared heating differs from traditional heating systems.
Why infrared heating works so well in stables
Infracenter's infrared heating panels do not heat the air in the same way as traditional elements or fan heaters.
Instead, the heat is absorbed by floors, walls, saddles, covers, furnishings and other surfaces in the building. When these surfaces are kept warmer, the risk of moisture remaining for longer periods is reduced.
The result is often:
Dryer saddle chamber
Dryer duvets
Dryer walls
Less raw air
More comfortable working environment
Higher comfort all year round
After many years of experience, we know that most stable owners do not ask for tropical heat. They want a stable that feels dry, fresh and comfortable to stay in.
Therefore, Infracenter often recommends around 200W per m².
When sizing stables, tack rooms and tack rooms, Infracenter often recommends around 200W per square meter.
It doesn't just depend on the desired temperature. It is equally important that the infrared heat has sufficient power to reach floors, walls and furnishings where moisture tends to accumulate.
Many people think that winter is the biggest challenge, but in practice, late summer and autumn are often just as difficult. Warm air can carry large amounts of moisture, making the stable environment easily feel raw despite relatively high temperatures.
When surfaces are kept warm, the risk of moisture remaining is reduced.
Recommended power in the stable
| Surface | Effect |
|---|---|
| 5 m² | 1000W |
| 8 m² | 1600W |
| 10 m² | 2000W |
| 15 m² | 3000W |
| 20 m² | 4000W |
| 30 m² | 6000W |
| 50 m² | 10000W |
| 100 m² | 20000W |
The table is a general guide.Ceiling height, ventilation, insulation and desired temperature always affect the final dimensioning.
How much power is available?
When heating larger stables, the most important question is often not how much power is needed, but how much power is available in the building.
Common fuse sizes
| Fuse | Available power |
|---|---|
| 10A | about 2000W |
| 16A | about 3600W |
| 2 x 10A | about 4000W |
| 2 x 16A | about 7200W |
With three-phase installations, significantly higher outputs can be installed, which is common in larger stable facilities.
The right temperature in the right space
Not all parts of a stable need to have the same temperature. With infrared heating and separate thermostats, each space can be adapted to its intended use.
| Space | Recommended temperature |
|---|---|
| Stable walk | 8–12°C |
| Saddle chamber | 15–20°C |
| Quilt room | 15–20°C |
| Staff areas | 20–22°C |
| Spool valve | Adapted as needed |
This provides better comfort while using energy where it is most useful.
Approved for stable environments
Stable environments place high demands on equipment. Moisture, dust and temperature variations require products that are built to function problem-free for a long time.
Power series
Infrastructure centers
Stable aisles
Saddle chamber
Quilt room
Staff areas
The panels can be mounted both on the wall and on the ceiling and provide even and comfortable heat while contributing to drier surfaces.
Dark Heater
Dark Heater is used when you want more directed heat or when the environment places extra high demands on the enclosure class.
With an IP65 rating, it fits very well in:
Flush buttons
Laundry facilities
Uninsulated stables
Extra vulnerable environments
Dark Heater is available in both black and white and retains its color without disturbing glow during operation.
Why stable owners choose Infracenter
Infracenter is today the Nordic region's leading specialist in infrared heating and has helped stable owners create a better indoor climate since 2014.
Our customers choose us because we offer:
Own quality products developed for long life
Documented experience from thousands of installations
Solutions adapted for stable environments
Products that contribute to drier surfaces and better comfort
Up to 10 years factory warranty on selected infrared panels
Expert knowledge in infrared heating for both small and large facilities
Frequently asked questions about infrared heating in stables
Is infrared heating suitable for stables?
Yes. Infrared heating helps to heat floors, walls and equipment, which often provides a drier and more comfortable stable environment.
How much power is needed in a stable?
As a guideline, Infracenter often recommends around 200W per square meter.
Are the panels approved for stable environments?
Yes.
When should I choose Dark Heater?
Dark Heater is an excellent choice in flush toilets, laundry areas and other environments where moisture and dust place higher demands on the equipment.
Does the stable have to be warm for infrared heating to work?
No. Many stable owners primarily use infrared heating to reduce moisture and create a drier environment, not to maintain high temperatures.
A drier stable environment makes a bigger difference than many people think
Most people start looking for a heating solution.
Many people discover that the biggest gain is something completely different.
Dryer blankets. Dryer saddles. Dryer walls. Less raw air. A better working environment and a stable that feels much more pleasant to stay in all year round.
That is why more and more stable owners are choosing infrared heating from Infracenter when the goal is to create a long-term dry, comfortable and well-functioning stable environment.